CUT & JET 4 COMBINED MACHINES

The CUT & JET 4 is for the production of unique pieces or for production. Combined CUT & JET machines allow endless shapes of cuttings and cut-outs.

TECHNICAL DATA
X axis stroke	3.800mm (149 5/8 in)
Y axis stroke– GANTRY	2.500mm (98 1/2 in)
Z axis stroke	350mm (13 3/4 in)
A axis rotation	-185 ÷185 (370) degrees
C axis inclination	see model
C2 axis inclination	see model
X axis rapid speed	45 m/min (147,6 fpm)
Y axis rapid speed	45 m/min (147,6 fpm)
Z axis rapid speed	10 m/min (32,8 fpm)
Main disk-holder electrospindle power	18 HP S6 (13,2 kW)
Main disk-holder electrospindle torque	72 Nm
Disk-holder electrospindle rotation speed	0 ÷ 6.000 rpm
Max disk diameter	425mm 16 3/4 in
Electrospindle tool holder	see model
5 or 4 axes interpolated numerical control X-Y-Z-A-(C)-(C2)	8070 FAGOR
Axes motors for axis X-Y-Z-A-C-C2 with absolute encoder	BRUSHLESS FAGOR
Monitor touch screen	17″ TFT Colour
Capacity of abrasive container	250kg (550 lb)
KMT cutting head	Active Idee II
Max total absorbed power – Saw Machine	18 kW
Max total absorbed power – Abrasive container	0,5 kW
Max total absorbed power – Pump 40HP	29 kW

CUT & JET 4

C axis inclination	– degrees
C2 axis inclination	– degrees
Electrospindle tool holder	–
Approx. Total Weight	6.000 kg (13.230 lb)
Length	6.750 mm (265 3/4 in)
Width	4.300 mm (169 1/4 in)
Height (without hp pipe)	3.220 mm (126 3/4 in)
Height (with hp pipe)	4.500 mm (177 1/8 in)
Automatic centralized greased lubrication. In case of anomalies the machine stops. Watertight IP 55 electric cabinet with safety thermostat. Sound power level: 84 ÷ 90 dB(A).